Original Antminer APW3++ PSU 1600W Power Supply for Bitmain D3 S9 S7 L3 B3 X3 T9

Description：
*The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
* This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.


Specifications:
Weight:
Gross Weight: 2.1kg
Package size:
32.7*16.8*12.6cm


Output
*DC Voltage:12.15V
*Rated Current(220V input): 133A
*Rated Current(110V input): 100A
*Rated Power(220V input): 1600W
*Rated Power(110V input): 1200W
*Ripple & Noise: <1%
*Voltage Regulation: <2%
*Source Regulation: <1%
*Load Regulation: <1%
*Setup, Rise Time: <2s
*Power off Protection Trip Time: >9mS
*Interface Type: 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
*Noise Level: <43db


Input:
*Voltage Range: 100-240V AC
*Starting Voltage: 95-105V AC
*Frequency Range: 47-63Hz
*Power Factor: >0.95 (full load)
*Leakage Current: <1.5mA (220v 50Hz)


Protection
1.Low-voltage Input:80-89V AC
2.Output Short Circuit:Yes
3.Output Overcurrent:134-185A max.
4.Overheat Protection:Yes

Environment Conditions
1.Operating Temperature: -20°C - 50°C
2.Operating Humidity: 20% - 90% relative humidity (non-condensing)

Structure
Dimensions: 220mm*108mm*62mm

Cooling
Fan:Forced-air cooling



Package includes:
1 x APW3 power supply for Antminer D3 S9 S7 L3 X3 B3 Z9 T9 V9